Aquasential Smart High Efficiency Iron-Cleer Water Filter | Culligan of Fort McMurray

If your Fort McMurray water leaves rust stains on your sinks, fixtures, or appliances, or carries a metallic taste and sulfur odor, the problem is likely iron and hydrogen sulfide in your water supply. Aquasential Smart High Efficiency Iron-Cleer Water Filter | Culligan of Fort McMurray

The Aquasential® Smart High Efficiency Iron-Cleer® Whole House Water Filter from Culligan of Fort McMurray eliminates both, chemical-free, at every tap in your home.

Culligan of Fort McMurray has served Fort McMurray since 1995 with 4.8 stars across 99 reviews. Our local technicians install and service every system we sell.

What the Iron-Cleer® Removes

The Aquasential® Smart HE Iron-Cleer® is certified to reduce:

  • Iron (clear water): Up to 10 ppm
  • Hydrogen sulfide: Up to 5.0 ppm

No chemicals. No salt. Just aeration, oxidation, and catalytic filtration working together to deliver clean, odor-free water throughout your entire home.

Why Fort McMurray Homes Need Iron Filtration

Well water and some municipal supplies in Fort McMurray carry dissolved iron that is invisible until it hits air, then it oxidizes and leaves red-brown staining on everything it touches, including sinks, tubs, dishwashers, laundry, and water-using appliances. Hydrogen sulfide adds the rotten egg odor that makes tap water unpleasant to use. Both problems are common and both are solved at the point of entry so every faucet, every shower, and every appliance in your home gets filtered water.

How It Works

Two-Tank System

The Iron-Cleer® uses a two-tank design with a filament-wound exterior and non-permeable inner shell. The first stage aerates and oxidizes dissolved iron and hydrogen sulfide. The second stage filters the oxidized particles out through catalytic media, no chemicals required.

Soft-Minder® Meter

Advanced diagnostics and daily water use monitoring so your system is always performing at spec. If something changes, you know before it becomes a problem.

Culligan Connect® App

Monitor and control your system from anywhere. Check usage, receive alerts, adjust settings, and even bypass the filter remotely when needed. The app keeps your Culligan of Fort McMurray team connected to your system too, for faster service when you need it.

External Leak Sensor (Optional)

An optional add-on that monitors for nearby appliance leaks and sends alerts directly to your phone, adding a layer of whole-home protection beyond water quality.

Certifications

The Aquasential® Smart HE Iron-Cleer® is certified by independent third-party organizations to perform as claimed:

  • NSF/ANSI Standard 42 (iron and H₂S reduction)
  • NSF/ANSI Standard 372 (lead-free materials)
  • CSA B483.1
  • WQA (Water Quality Association) tested and certified

Performance Specifications

Spec

10" Model

12" Model

 

Max Service Flow

6 gpm @ 9 psi

9 gpm @ 14 psi

Filtration Capacity

Up to 1,400 gal/cycle

Up to 2,000 gal/cycle

Operating Pressure

20–60 psi

20–60 psi

Electrical

24VDC, 1W/60 Hz

24VDC, 1W/60 Hz

Warranty

  • GBX circuit board and control valve body: 10-year warranty
  • Soft-Minder® meter: 5-year warranty
  • Entire system: 1-year warranty

30-Day Money-Back Guarantee

If you are dissatisfied with your Culligan of Fort McMurray product for any reason

All residential Culligan equipment is backed with a 100% Satisfaction Guarantee. If you're not completely satisfied with your Culligan equipment within 30-days from the date of purchase, we'll refund the purchase price.

The Culligan Promise

At Culligan of Fort McMurray we go to great lengths to test your water, inspect your plumbing, and ask questions about your family's water needs to make sure you're happy with your Culligan water from day one. However, if we ever make a mistake, let us know within 30 days and we'll be glad to correct it or refund your money.

You have my personal promise. If there's ever an issue, don't hesitate to call me.

No risk.

Professional Installation by Culligan of Fort McMurray of Fort McMurray

Every Iron-Cleer® system is installed by a certified Culligan of Fort McMurray technician. Installation connects to your main water line so every tap in the home receives filtered water. A bypass valve is included so you can isolate the system for service without interrupting your water supply. Typical installation requires access to main water piping, a nearby drain, and an electrical outlet, usually in a basement, laundry room, or garage.

Culligan of Fort McMurray has served Fort McMurray since 1995. Our technicians know local water conditions, stock parts locally, and are available for ongoing service, not a 1-800 number.

4.8 stars across 99 Google reviews.

Frequently Asked Questions

Is the Iron-Cleer® a whole-house system?

Yes. It connects to your main water line so every faucet, shower, appliance, and water-using fixture in your home receives filtered water.

Does it use chemicals?

No. The Iron-Cleer® uses aeration and catalytic filtration to oxidize and remove iron and hydrogen sulfide without any chemicals or salt.

How much iron does it remove?

The system is certified to reduce clear-water iron up to 10 ppm.

What about the sulfur smell in my water?

The Iron-Cleer® is also certified to reduce hydrogen sulfide up to 5.0 ppm, which is the compound responsible for rotten egg odor in water.

How is this different from a water softener?

A water softener reduces hardness minerals (calcium and magnesium). The Iron-Cleer® targets iron and hydrogen sulfide, which cause staining and odor. Many Fort McMurray homes benefit from both systems depending on their water profile. Culligan of Fort McMurray tests your water and recommends the right combination.

Will it damage my pipes or appliances?

The opposite. Iron staining is a sign that dissolved iron is already depositing on your fixtures and inside your appliances. Filtering iron at the point of entry protects everything downstream.

What is Soft-Minder® technology?

Soft-Minder® is a monitoring meter built into the system that tracks daily water usage and system diagnostics. It helps optimize performance and alerts you to changes before they affect your water quality.

What does the Culligan Connect® app do?

The app lets you monitor water usage, receive alerts, adjust settings, and bypass the system remotely. Culligan of Fort McMurray can also access your system data to diagnose issues and coordinate service more efficiently.

Is there a satisfaction guarantee?

Yes. If you are dissatisfied with your Culligan of Fort McMurray product for any reason

All residential Culligan equipment is backed with a 100% Satisfaction Guarantee. If you're not completely satisfied with your Culligan equipment within 30-days from the date of purchase, we'll refund the purchase price.

The Culligan Promise

At Culligan of Fort McMurray we go to great lengths to test your water, inspect your plumbing, and ask questions about your family's water needs to make sure you're happy with your Culligan water from day one. However, if we ever make a mistake, let us know within 30 days and we'll be glad to correct it or refund your money.

You have my personal promise. If there's ever an issue, don't hesitate to call me.

Why choose Culligan of Fort McMurray over a box-store iron filter?

Box-store filters are not sized or configured for your specific water chemistry. Culligan of Fort McMurray tests your Fort McMurray water, selects the right system and tank size for your iron and H₂S levels, and installs it professionally. The result is a system that actually works for your water, backed by local service from a team that has been here since 1995.

100% Satisfaction Guarantee Worlds most efficient NSF Certification | Culligan of Fort McMurray UL Certified Company in Fort McMurray, Lac La Biche, Anzac, Fort McKay & Saprae Creek Water Quality Association Tested and Certified Under Industry Standards
Outdoor_Rear-Door-Technician

Get Better Water Today!

Fill out the form to learn more...